ULTRA SYNTEK MOTOR OIL 5W-30, for gasoline and diesel engines in passenger cars and light trucks, has been formulated with 100% synthetic base stocks and high technology additive systems to provide outstanding protection during engine start-up and during more demanding kind of driving conditions. LUBETEK ULTRA SYNTEK MOTOR OIL SAE 5W-30 meets and exceeds ILSAC standard GF-5, API level SN, and more demanding requirement of American, European and Asian car manufacturers, such as BMW, MB, Audi, Corvette, VW, Honda, Hyundai, Lexus, Toyota, Ford, Chevrolet and others.

ULTRATEK 10W-30 and 20W50, for gasoline engines in passenger cars, are formulated with high quality petroleum base stock and modern additive systems to provide very good performance and a high quality motor oil value focus alternative. ULTRATEK 10W-30 and 20W-50 meet requirements defined by ILSAC standards GF-5 and API level SN.

NAUTEK TC-W3 is a premium high quality motor oil formulated for use in outboard engines, motorcycles, snowmobiles, chain saws, garden equipments, pump and other 2-cycles engines, with premixed, automatic mixer or oil injection system. �NAUTEK TCW-3 meets API TCW-3, API TC and JASO FC service levels, therefore is suitable for use in motors refrigerated with air or water. In marine applications, meets NMMA�s service level recommended for principals outboard motor manufactures: Evinrude, Johnson, Mercury, Suzuki, Yamaha and others. The ratio for premix fuel-oil is defined for engine manufactures, and may go from 15:1 toward 75:1 depending of engine characteristics.
Download PDSDownload MSDS

MOTORCYCLE 4T SYN 10W40 is a outstanding product formulated with synthetic base oils and high performance additives, for insuperable engine protection, even in sport applications. This product meets JASO T903 Type MA/MA2, API SJ, and is ideal for combined system of lubrication including engine, transmission and clutch.
Download PDSDownload MSDS

ATF SINTEK MULTIPLUS is a full synthetic fluid recommended for reach maximum performance in virtually all automatic transmissions, including those where OEM requires: Chrysler 3 & 4 fluids, Dexron VI, Dexron III, GM T-IV, Mercon SP, Mercon V, Nissan Matic-J, Toyota T-IV y Toyota WS, Honda ATF-Z1, MB, Mitsubishi Diamond SP-IV, and many others.

ATF D III is a premium automatic transmission fluid formulated for meets GM DEXRON III and also MERCON, Allison C-4 and Caterpillar TO-2.

TRACTOTEK UNIVERSAL is a fluid suitable for virtually all agricultural tractors and off-highway equipments requiring one lubricant for the transmission, final drive, hydraulics system and wet brakes. This product is formulated with high quality hydrogenated oil and a complete additive packet, for meets requirements of equipment manufacturers, such as: Case International, Deutz-Allis, Ford, Fiat-Hesston, John Deere, Kubota, IHC, Komatzu, Landini, Massey-Ferguson and others.

TRACTOFLUID 10W, 30 and 50

TRACTOFLUID SYNTEK 50 is a fully synthetic transmissions lubricant for use in off and on highway equipments, designed for meet CAT TO-4 and requirements of Eaton and Rockwell transmissions.

TRANSTEK 80W90 and 85W 140 are premium automotive gear lubes recommended where are required API GL-5, MT-1, MACK GO-J or MIL-L-2105E.

TRANSTEK SYN 70W90 and 75W140 are exceptional full synthetic gear lubes designed for delivery long life outstanding protection and performance to gear box in most severe automotive applications. These products excess service levels API GL-5, MT-1, MACK GO-K, MIL-L-2105E, SAE J2360 and surplus requirements of Eaton and Rockwell for differentials.

DELTEK XHD 15W-40 CJ-4 is the newest generation of heavy duty motor oil, than meets and exceeds the service requirements for both, traditional engines and newer emission compliant engines including EGR (exhaust gases recirculation) �and DPF (diesel particulate filter). This outstanding product is recommended for engines in virtually all on-highway and off-highway service applications, particularly those requiring API CJ-4, CI-4 Plus, CI-4, CH-4, CF-2, CF, and API SN, SM or SL quality oils. DELTEK XHD 15W-40 is capable to meet more rigorous worldwide specifications:� ACEA E4, Caterpillar ECF-3, TO-2, Cummins CES 20081, Global DHD-1, JASO DH-2, Detroit Diesel 93K218, Mack EO-O Premium Plus, MTU type 2, MTU type 1, MAN 3275, Daimler Chrysler, Hino, Volvo VDS-4, among others.

DELTEK PLUS 15W-40 is a premium motor oil recommended for diesel engines requiring API CI-4 or previous levels. This product has been formulated for meets several OEM specifications from Cummins, Mack, MB, MTU, Volvo, CAT, and others.

DELTEK PLUS 25W-60 provides superior performance and reduces oil consume in old engines, especially when there are leak or have high level of oil evaporation. This product meets API CH-4/SL.

DELTEK PLUS 40 is a premium diesel motor oil with TBN superior to 10 recommended for engines requiring SAE 40 monograde viscosity range with API level CF, CF-II/SL. This versatile product has been formulated for meet Caterpillar TO-2, Allison C-4, MTU type 1, MB-227.0, FORD ESE-m2C153E, MIL-L-46152E, as well as ashes limit defined for GM Detroit Diesel.

DELTEK PLUS 10W is a diesel motor oil of low viscosity suitable for be used too, in all climes, as high performance hydraulic oil in mobile equipments, especially where are required CAT TO-2 or Allison C-3 fluids.
Download PDSDownload MSDS

GEARTEK XP is a series of super high performance industrial gear lubricants formulated with new generation additive technology combined with high quality base oils. GEARTEK XP are recommended for use in all type of enclosed industrial gear drives, bearings, chain and slides requiring extreme pressure oils, and come in followed viscosities: ISO 68, ISO 100, ISO 150, ISO 220, ISO 320 and ISO 460.

GEARTEK SYN is a series of full synthetic gear lubricants formulated with high oxidation resistant synthesized fluids (PAO) and select additives to provide maximum protection against wear, rust, and corrosion and foaming. The low coefficient of friction of these lubricants reduces power consumption and gearbox operating temperatures, enlarging therefore the useful life of oil. GEARTEK SYN are recommended for use in industrial enclosed gear and plain or rolling element bearings under severe load and temperature conditions, particularly where these conditions result in short oil conventional life or high maintenance cost. Applications include those where corrosion of yellow metals like brass, bronze or copper is a concern, and those where is need guarantee full compatibility of the lubricant with elastomeric seal materials, plastics and paints. GEARTEK SYN series include all viscosities from ISO 68 to ISO 1000.

HYDRATEK AW is a series of premium quality hydraulic oils fortified with high performance additives to provide outstanding anti-wear protection, prevent rusting and offer rapid water separation. This series include followed viscosities: ISO 32, ISO 46, ISO 68 and ISO 100.

HYDRATEK SYN are superior hydraulic oils formulated with high quality synthetic hydrocarbons and probate additive technology to meet requirement of all hydraulic system, included Dennison HFO, Vickers and Cincinnati Milacron specifications. This series include ISO 15, 22, 32, 46 and 68 oils.

COMPRESSOR SH lubricants are formulated with the highest quality synthetic PAO base oils available and advance additive technology. They provide excellent thermal and oxidation stability, very low volatility, high viscosity index, excellent water demulsibility and superior protection against rust, corrosion, foaming, varnish formation and wear. These oils are recommended for rotary screw, centrifugal and reciprocating compressors. The series includes ISO 32, ISO 46 and ISO 68 oils.

COMPRESSOR X-COOLANT is a powerful blend of polyglycol and ester synthetic base stocks. This product has the SAE grade 10W20, as is specificities for some compressor manufactures, and has proven be superior in resistance to thermal degradation and deposit formation; thus, becomes a alternative to varnish and sludge and the frequent lubricant changes associates with petroleum oil.

COMPRESSOR MS 125 is synthetic blend compressor oil formulated with highly refined hydrogenated base stock fortified with a mixer of synthetic oil and exceptional additive packet, for provide excellent performance when is used in heavy multi stage reciprocating compressors. This product reduce oil consume, minimize formation of carbon and varnish, eliminate risk of recompression, at time that protect against wear, rust and corrosion. In addition, because has high flash point, improves safety to operation of reciprocating compressors.

LINETEK TEXTILE OIL is a series of white spindle oils highly refined for use in high speed bearing and other components of textile machinery. This series include oils ISO 10, 15, 22, 32, 46 and 68.

LINETEK TURBINE OIL is a series of superior quality rust and oxidation inhibited oils designed for use in both steam and gas turbines. Thank to its elongated pass of ASTM D-943 TOST, these oils can be used where very long life of the lubricant is required.� LINETEK TURBINE OIL are recommended for steam and gas turbines, including the GE Frame 7 units, as well as many pumps, compressors, oil circulating systems, oil mist systems and other applications requiring a high quality turbine oil. This series include ISO 32, ISO 46 and ISO 68 oils.

LINETEK CIRCULATE OIL is a series of superior quality lubricants, ISO 100, ISO 150 and ISO 220, designed whit a totally ashless technology, specifically for oil circulations system lubricating gear and bearings under severe operation conditions, like in paper, wood-board and steel industries.

REFRIGERATEK 68 is a highly refined naphthenic straight mineral oil designed primarily for lubrication of compressors in industrial refrigeration systems using ammonia, methyl chloride, carbon dioxide or some fluorinated refrigerants.

HAMMER OIL is a premium oil series (ISO 100 and 150) formulated with special extreme pressure and tackiness additives for acquire adhesively and film strength, necessary to lubricate pneumatic tools such as jackhammer, percussion drills, rock drills and pavement breakers. Because their low volatility components and balanced formulation, these products can be used in open areas and too in low ventilated miner tunnels, with normal precautions for health and safety of operators.

SOLUBLE OIL is highly effective soluble oil for metalworking applications. This versatile product provides excellent performance cooling and lubricating the tool, in cutting and grinding applications, for ferrous and no ferrous metal. (GW HIGH SPEED SOLUBLE OIL).

ANTIRUST OIL protects very effectively metal surfaces from rusting during storage and transit. This rust preventive oil has anti staining properties and can easily be removed by simple methods.

QUENCHING OIL is designed for the quenching of metals and is recommended when faster, deeper and more uniform hardening is required in steels with wide variations in alloy content and grain size.

THERMO FLUID is a high refined oil for be used as heat transfer in industrial applications. This product has high thermo stability, very good heat transfer coefficient and provide a long useful life.

WHITE MINERAL OIL is a series of pure white oils made from select base stocks. They are non-toxic, odorless, tasteless and colorless oils, conform to specifications of the American Food and Drug Administration, and meet regulations 21 CFR 178.3620-b and 21 CFR 573.68. These oils are NSF H-1 and 3H registered, and are approved for use in pharmaceutics and food industries.

HYDRA FOOD GRADE OIL ISO 32, 46 and 68, is a series of food grade hydraulic oils formulated to provide superior performance in food plant hydraulic systems. Provide outstanding anti-wear protection, are compounded to prevent rusting in presence of moisture, are non-foaming, and have rapid water separation characteristic. These oils are NSF H-1 registered, and are approved for use in pharmaceutics and food industries.

GEAR FOOD GRADE OIL ISO 150 and 220 is a couple of food grade gear oils formulated to provide high load carrying capacity and wear protection to closed gear and bearing present in food and pharmaceutical industries. These oils are NSF H-1 registered, and are approved for use in pharmaceutics and food industries.

BIO TRACTOR FLUID is a multifunctional biobased fluid that meets or exceeds the performance requirements of all major brands of farm tractors and off-highway equipments that utilize a common reservoir for fluid working in hydraulic system, transmission, end drives and wet brakes. This product is classified as ultimately biodegradable (PWI) and non-toxic; thus, is ideal for equipments operating in environmentally sensitive areas.

BIO HYDRAULIC OIL is a series of anti wear hydraulic oils formulated with biodegradable base stocks and the lasted in ashless biodegradable additive chemistry. These oils feature high oxidative stability, excellent wear and corrosion protection, nil ecotoxicity and are compatibles with petroleum oils, coatings and seals. BIO HIDRAULIC series oils are recommended principally for hydraulic system operating in environmentally sensitive areas where leaks and spills can cause environmental damage. They can be used too for equipments lubricated by brush or dripped techniques, as bearings in submerge pumps, chain saws and others, in wood, aquaculture, agriculture and miner industries.

BIO GEAR EP OIL is a series of EP lubricants recommended for protection of gear and bearings in heavy duty applications subject to high temperatures, heavy loading and shock loading. Because their formulation, these oils are ultimately biodegradable and non-toxic, thus, can be used in environmental sensitive areas.

BIO ROCK DRILL OIL is formulated for the lubrication of pneumatic tools, including rock drills used in mining industry. Contains biodegradable base oil fortified by special extreme pressure and tackiness additives to provide insuperable wear protection. This is a non-toxic, heavy metals free and full biodegradable product, recommended for use in environmental sensitive areas and forced air ventilation mine tunnels with safety for operators and environment.

GREASE TEK EP is a series of lithium greases with extreme pressure EP characteristics intended for multipurpose industrial and automotive applications. This series greases includes NLGI 00, 0, 1, 2 and 3 consistency grades.

GREASE LIPLEX 2 is high quality lithium complex grease with superior characteristics, recommended for more severe industrial and automotive heavy duty applications. Their high resistance to water, temperature and load made them suitable for most severe use in construction machinery, agricultural equipments and industrial machinery.

GREASE LIPLEX MOLY 2 is high quality NLGI grade 2 EP, lithium complex grease, formulated with specialty additives and solid lubricant Molybdenum. Therefore satisfy the severe requirements of heavy machinery operating at moderate or high temperature. This grease is highly recommended for construction and mobile machinery working in open areas and subject to impact loads, such as retro-excavators, tractors, fifth wheels.

GREASE CSC SYNTEK is new technology over-based calcium sulfonate complex grease whit best synthetic base stock. This product has unmatched lubrication properties offering superior load carrying ability, combined with superior wear, anticorrosive and rust protection. This is excellent grease for the lubrication of all heavy industries where heavy loads, high temps, extreme pressure, corrosive and water distress prevail.

GREASE SYNTEK XHP 220 and 460 are exceptional synthetic lithium complex extreme pressure greases designed for severe operating conditions. The 220 grade is suitable for high speed application and the 460 grade is recommended for slow to medium speed bearing, both operating under rigorous conditions of temperature, loads and water presence, even in corrosive environments. These products provide long life to: rolling elements, antifriction bearings, high temp wheel bearing beside disc brakes, electric motor bearings, throw out bearings, universal joint, fifth wheels and more, still under continuous high operating temperatures. These greases are ideal for heavy duty applications in agricultural, automotive, construction, cement, marine, mining, oil & gas, paper & pulp, steel and trucking industries.

GREASE OPEN GEAR SUPER BLACK is a high quality semi fluid NLGI 00 grease composed whit an aluminum complex soap, and fortified whit extreme pressure components, anti wear additives, and a powerful combination of solid lubricants. Has been formulated in high viscosity base oil, for be suitable for lubricate extremely heavy loaded, slow moving, large open gear drives, operating in very hostile environments, even for water ingress applications.

GREASE XAL FOOD 2 is a multipurpose hi-temp food grade designed for a wide range of applications within the food industry. This white grease is formulated with aluminum complex, food grade base stock and special non-toxics additives, for meets the NSF H-1approbation.

BIO GREASE EP-2 is high performance biodegradable grease, suitable for moderate and high temp applications in equipments located in sensitive environmentally sensitive areas This grease is manufactured totally with vegetable base oil.